Flat Bottom Stand-Up Pouch

Flat Bottom Stand-Up Pouch (FBSUP)

This bag design combines the advantages of Side Gusseted Bag and Stand-Up Pouch. The bag has Two Side Gussets and a Flat Bottom Block Gusset which provides three dimensional views as well as a true stand-up feature. With the Flat Bottom Gusset, the bag can stand on the shelf easily even packing with light density products. Both Side and Bottom Gussets can be printed.

Our factory can manufacture the FBSUP with or without Zipper Seal. We can also mount a One-Way Vent Valve for Coffee packaging. If customer requires the side gusset to be fully opened for machine packaging, our factory can mount a Front Tear-Off Zipper Seal on the bag. Regular zipper seal is laminated right across the width of the bag with both side gussets sealed in. However, for the Front Tear-Off Zipper Seal, the zipper seal is mounted only on the front panel of the bag. This allows the two side gussets to open fully.  

Flat Bottom Stand-Up Pouch is widely used for packing Pet Food and Treats, Coffee, Tea and Confectionary.

Optional Features:
Anti-Fog-Food Pkg
Anti-Fog-Food Pkg


Construction:

A proprietary anti-fog coating is applied onto the film substrate during manufacturing.

Feature Highlight:

This feature causes the fog inside the bag to condense into water droplets when it comes in contact with the anti-fog coating inside the bag. The condensed water droplets then flow down the side of the bag and gives you clear visibility of the contents inside.

This technology was used on the visors of astronauts to give them clear visibility when they are in space. The same technology is now used on our bags.


Die-Cut Handle-Food Pkg
Die-Cut Handle-Food Pkg


Construction:

A die is used to cut a handle hole on the bag lip handle above the zipper seal to create a grip handle. This built-in handle is only suitable for light to medium weights. For heavier packages, we have a few options:

  • Change the shape of the die cut handle to an “eye class design”
  • Make a re-enforced patch handle
  • Mount an ultrasonic heat-sealed injection-moulded handle.

Feature Highlight:

This feature allows for easy transportation of the product in the bag. There is no extra cost if your custom requirements can be met by our existing tools. However, there will be an extra cost for making new dies.


Easy Tear Laser Scored Line-Food Pkg
Easy Tear Laser Scored Line-Food Pkg


Construction:

A laser machine is used to punch a precise dotted line on the bag lip to create a controlled straight line tear when the consumer opens the packaging. This feature replaces conventional tear notches.

Feature Highlight:

Unlike conventional tear notches, a laser scored line makes a clean straight line tear. This makes opening the packaging easier without compromising the packaging strength and integrity.


Front Tear-Off Zipper Seal-Food Pkg
Front Tear-Off Zipper Seal-Food Pkg


Construction:

Unlike the regular zipper seal packaging, both the male and female zipper profile for this packaging is mounted on the Front Panel of the bag. The front panel of the poly film substrate is pre-cut at the location where the zipper seal is mounted. A set of zipper seals is then cut to the correct length before it is heat sealed onto the poly film substrate.

Feature Highlight:

The primary advantage of this feature is that it saves you time and cost. The unique feature of this kind of bag closing system is that the zipper seal is located at the front panel of the bag. As such, there is no need for a pre-opening procedure and there will not be a risk of the zipper seal getting in the way during product filling.


Hang Hole-Food Pkg
Hang Hole-Food Pkg


Construction:

A hole is cut onto the bag lip with a round hole punch or a custom shape tooling device. A standard round hang hole can be 6mm, 8mm, or 10mm in diameter. Differently-shaped hang holes like the Euro H/H can be customised upon request. There will be no extra charge if the factory has the existing tooling.

Feature Highlight:

This feature allows small packages to be hung on wall displays. This gives your products high exposure because most wall displays are located at the end corners of the display shelves. You can even have the same product displayed on shelves as well as on wall displays for extra exposure.    


Hot Stamping-Food Pkg
Hot Stamping-Food Pkg


Construction:

Through our hot stamping process, you can have images of your logo or brand name on our Plain Stock Pouches. The hot stamping method can work with Kraft paper or poly film bag surfaces.

Feature Highlight:

This feature allows you to print your logo or brand name onto your packaging in a small quantity. This is ideal for test marketing your products without a costly investment into larger quantity print operations. 


Matte or Gloss Surface Finish-Food Pkg
Matte or Gloss Surface Finish-Food Pkg


Construction:

Special matte or gloss printing ink used on special print plates are required to create the finishings for these packagings.

Feature Highlight:

This feature enhances the look of your packaging. It has the capability to give your packaging a more organic and premium look. It also helps to differentiate your products from those of your competitions. This feature is normally used to highlight a brand name or product image.


Micro Vent Holes-Food Pkg
Micro Vent Holes-Food Pkg


Construction:

Hot micro needles mounted on a steel roller are rolled onto the film substrate to create continuous rows of perforated vent holes. Cold Micro Needles mounted on a steel block are then punched into the film substrate to create a rectangle block of perforated vent holes.

Feature Highlight:

Micro Needle Vent Holes allow for venting while preventing contamination, including moisture. This feature is important for the baking industry for use in bread sleeves, keeping the bread fresh.

In the produce industry, these same Micro Vent Holes on produce pouches help to reduce moisture loss on leafy greens and keep them from drying out too fast in the cooler. This helps extend the shelve life of the produce.


One-Way Valve-Food Pkg
One-Way Valve-Food Pkg


Construction:

An injection-moulded one-way air release valve is manually sonic-sealed onto the back panel of the finished pouch.

Feature Highlight:

This one-way valve allows air pressure inside the pouch to vent out without allowing outside air to get in. 


Round Corner-Food Pkg
Round Corner-Food Pkg


Construction:

A custom made die cuts the four sharp corners of a pouch to create rounded corners. Different-sized pouches will require a new set of tooling, which will cost is extra.

Feature Highlight:

This feature enhances the cosmetic look of your packaging. It makes your product stand out, and is an ideal feature to incorporate into your packaging if you have multiple SKU items in the same family line of products. 


Spout-Food Pkg
Spout-Food Pkg


Construction:

The molded plastic spout is ultrasonically heat sealed onto the top opening of the pouch. The spout can also be mounted at an angle on either the right or left top corner of the pouch. The angle of the mount allows consumers to easily pour the packaged contents from within. A die-cut handle or molded handle can also be mounted on the opposite end of the spout. A tamper-proof molded plastic cup is used to cap the spout after the content is manually or machine-filled.

The spout sizes we currently offer are 9.5mm, 16mm, 21mm, and 34mm (interior dimensions). Custom colour caps are also available upon request.

 

Feature Highlight:

The re-closable spout allows for easy dispensing, while also provided a convenient yet secure tamper closure.

This feature is commonly used on Regular Stand-Up Pouches and Custom Die Cut Shape Stand-Up Pouches.

Applications:

  • Dishwashing Detergent
  • Laundry Detergent
  • Shampoo, Conditional, Body Wash
  • Cooking Oil
  • Juices
  • Water
  • Pallet size Fertilizers

Tear Notch-Food Pkg
Tear Notch-Food Pkg


Construction:

The Tear Notch packaging features small triangle cut-outs, normally about 5mm, on both sides of the sealing edges of the pouch. These two tear notches are normally located about 13mm to 15mm above the Zipper/Slider Seal.

Feature Highlight:

This feature allows for easy tearing open of the packaging with your fingers without the need for scissors or knives.


Tin-Tie-Food Pkg
Tin-Tie-Food Pkg


Construction:

A section of tin-tie coated plastic is mounted on the front panel of the bag. The tin-tie is further coated with a layer of adhesive on one side for mounting. The adhesive reinforces the tin-tie for re-closure.

Feature Highlight:

Compared to other bag closures available, this is an economical solution that does not compromise on providing a “high-quality” look. By request, the customer is able to select the colour of the packaging tin-ties. We also offer pre-application and custom-positioning tin-tie services by request.

This feature is commonly used on Side Gusset Pouches and Side Gusset Flat Bottom Stand-Up Pouches.

Applications:

  • Cookies
  • Chocolates
  • Coffee
  • Dehydrated Fruits and Nuts

Zipper Seal-Food Pkg
Zipper Seal-Food Pkg


Construction:

Poly Resin extruded through a pair of Male and Female metal dies to form a continuous pair of Zipper Seal. The Male and Female zipper seals are then mounted on the inside front and back panel of the pouch bag by heat sealed. We are one of the few factories that produce our own zipper seal profile in-house. This gives us the competitive edge we need to keep our bag cost competitive and the ability to make Custom Profile Zipper Seal to meet our customers’ specific requirements.

Feature Highlight:

Zipper Seal is the most Economical and Widely used form of Poly Bag Closure. It is simple to use and convenience. The Resalable bag feature keeps the product fresh longer after the packaging is opened.

This feature is suitable for Regular Stand-Up Pouches, Side Gusset Flat Bottom Stand-Up Pouches, and Tamper Proof Vacuum Pouches

Applications:

  • Snack Foods
  • Health & Wellness Foods
  • Dehydrated Fruits and Vegetables
  • Nuts
  • Cereals
  • Frozen Fruits & Vegetables

*Click on picture to see feature detail



Request a Quote
Customer Information
Product
Position
Upload PDF
Message / Comments
Security Question: 5 + 6 =